321 Coilovers are part of the  Family of Suspension and Brake Components


Strut housings for both the Koni 8610 and 8611 family  http://www.koniracing.com/8610.html of strut inserts are available for Subaru WRX. These are "drop-in" replacements for the factory units.  This swap can be accomplished with simple tools, requires NO welding or fabrication of any kind - although I highly recommend having your car aligned after installing any suspension components.

The Subaru WRX Factory Rear Strut is shown without the spring... The coilover unit directly below is shown as it arrives at your door. Simply remove your factory unit and replace with the coilover.






Ride height adjustments are easily made by turning the gold adjusting nut. You have over 4 inches of height adjustability with these units - allowing you to maintain factory right height setting or lower it.

The last item of importance is spring rate. We are happy to discuss spring rates - or provide your with the spring rate of your choice ranging from 175# to 500# in increments of 25#

Email or call (321)960-5945 with your needs and I can provide a solution. For more information on Strut Inserts, refer to Koni's Road Racing information at :  http://www.koniracing.com/8610.html






For more information email dave